Remove the filler cap from inside tube and fill with either liquid or dust, then replace the cap.
The Spritzerâ„¢ should be completely dry when changing from liquid to dust.
Push the inside tube down until you feel resistance or hear a click. This opens the valve and releases a small amount of liquid or dust into the large tube.
Aim nozzle end of the Spritzerâ„¢ and pump - gentle strokes are best.
Density of spray is controlled by frequency with which the valve is opened - no need to hit the bottom with each stroke.
Force of spray is controlled by the length and vigor of pumping - the longer the stroke the bigger the spray